|
THE FOUR WAY FLASHERS IN 5 MINUTES MOD PICTURES Using the directions that Cruizer posted on thesabrehood.net, I went shopping for a mini-switch from Radio Shack, a 2 pole 12volt flasher from Checker Auto Parts and I had the rest of the stuff already. His instructions are contained in this .pdf download. "FourWays for $5 or Less" . I found the MOD to be very easy to follow and very easy to accomplish. Here's some pictures of my installation: |
|||||||
 |
I decided to put the flasher between the wire bundle and the frame. There's plenty of room there and my Mustang SquareBack seat has plenty of clearance when it's installed. You can see the black wirewrap going to the right where it goes to the 4 way flashers switch as shown below. | ||||||
 |
|||||||
|
Another view of the switch from the rear of the bike
|
|||||||
 |
|||||||
|
Fuses for the 4 ways and the 12 volt Plug inside my Fairing
|
|||||||
 |
|||||||
| This mod works great and I can't believe it was so easy! While I was messing with flashers, I made a pigtail adapter so I can use a generic 12volt 3 pole flasher with my Turn Signals. The OEM flasher was messing up and I wasn't gonna pay $48.00 for a new one. See my "Screw the OEM flasher MOD" on the mod pages. | |||||||